GlobTek ITE Power Supply 9 Volt 5 Amp GT-21097-4509

Description:

• INPUT VOLTAGE:
  • 90 VAC TO 264 VAC
• INPUT CURRENT:
  • < 1.6 A RMS AT 90 VAC INPUT
• INPUT FREQUENCY:
  • 47 HZ - 63 HZ
• OUTPUT CURRENT:
  • NO MINIMUM LOAD REQUIRED
• OUTPUT POWER (RATED):
  • 50 WATTS MAX
• OUTPUT RIPPLE (PEAK TO PEAK):
  • 1% OF OUTPUT VOLTAGE , PEAK TO PEAK, TYPICAL
• OUTPUT REGULATION (LINE/LOAD):
  • +/-5% MEASURED AT THE OUTPUT CONNECTOR
• LINE REGULATION:
  • +/- 1% TYPICAL MEASURED AT FULL LOAD
• TURN ON/ TURN OFF OVERSHOOT:
  • 5% MAXIMUM, 1mS TYPICAL RECOVERY TIME FOR 25% STEP LOAD
• TURN-ON DELAY:
  • 1 SEC TYPICAL
• HOLD-UP TIME:
  • 10mS TYPICAL AT NOMINAL INPUT VOLTAGE AND FULL LOAD
• INRUSH CURRENT:
  • 20A MAX COLD START FOR 115VAC
• EFFICIENCY:
  • 75% TYPICAL AT NOMINAL INPUT AND FULL LOAD
• SWITCHING FREQUENCY:
  • 100 KHZ TYPICAL
• OVER-VOLTAGE PROTECTION:
  • VOLTAGE LIMITED TO LESS THAN 130%, CROWBAR METHOD
• OVER-CURRENT / SHORT CIRCUIT:
  • HICCUP MODE WITH AUTO-RECOVERY (110 - 130% OF RATED LOAD), HICCUP MODE OUTPUT WILL AUTORECOVER UPON REMOVAL OF SHORT
• OTHER PROTECTION:
  • INPUT LINE FUSING
• DIELECTRIC WITHSTAND VOLTAGE:
  • 4242VDC (3000VAC) FROM PRIMARY TO SECONDARY
  • 2121VDC (1500VAC) FROM PRIMARY TO SECONDARY
• LEAKAGE CURRENT:
  • <500uA at 264Vac INPUT VOLTAGE
• LINE SURGE:
  • EN 61000-4-5 LEVEL 4
• MTBF:
  • GREATER THAN 50,000 HOURS AT 25C AMBIENT TEMPERATURE NOMINAL LINE AND FULL LOAD (MIL-217 STD)
• OPERATING TEMPERATURE:
  • 0C TO 40C AMBIENT TEMPERATURE
• STORAGE TEMPERATURE:
  • -40 C TO 80 C
• HUMIDITY:
  • 0% TO 90% RELATIVE HUMIDITY

Note: Please confirm compatibility with your system before purchasing because we do not accept returns for compatibility issues.